Exposure meter
- Measuring range (ISO 100/21°):
- Light metering: EV 4 to 17 (continuous light)
- Object measurement: EV 9 to 17 (continuous light)
- Film speed: ISO 6/9°to 12,000/42°
- Shutter speeds: 1/8000 second to 60 seconds
- Aperture values: 1.0 to 90
- Light values: 1 to 20
- Speed: 8 to 128 frames/sec (180° shutter opening angle)
- Measuring cell: selenium
- Battery: none
- digitally displaying light meter
- for continuous light and flash metering
- large measuring range and high accuracy
- Light and object metering
- Flash metering
- Microprocessor-controlled and monitored
- Digital LCD display in tenths of a millimeter
- Exposure meter
- with incident and reflected light system
- Digital light meter for flash and ambient light
- advanced video/cine functions
- LCD display (backlight turns on automatically below 5EV)
- Auto power off
- 3 metering modes: Photo mode, HD Cine mode, Cine mode
- for continuous light and flash light measurement
- large measuring range and high accuracy
- Swivel head
- Light and object measurement
- Microprocessor controlled and monitored
- Digital LCD display in tenths
- Analog contrast display in half f-stops
Free live consultation
Your individual consultation - from the comfort of your sofa
Arrange appointment- TTArtisan Exposure Meter II black
- a small and lightweight meter for setting ISO, aperture and shutter speed
- compatible with older Leica camera models and similar rangefinder cameras
- Aperture ring: clicks - metering: 45 degrees
- Shutter speed: 23 steps
- Metering mode: average metering
- Sekonic Step Up Ring (30.5 mm - 40.5 mm screw-in zoom lens hood)
- suitable for the light meters of the series L-858D, L-758, L-608, L-558
- additionally acts as lens hood
- prevents faulty light measurements due to glare of the Lens
- Digital measuring and analog displaying exposure meter for flash and continuous light measurements
- Flash and continuous light metering
- Light and object metering
- Microprocessor controlled and monitored
- Digital LCD display in 1/3 steps
- Contrast display in 1/3 light values
- Light meter
- high sensitivity and accuracy
- ergonomic design
- 2.7 inch touch screen
- wireless flash control
- also measures HSS flashes
- Type: Exposure meter with measurement result fixation
- Luminous intensity measuring angle: approx. 30°
- Light-sensitive element: silicone photodiode
- Speed: EV 1 (1 sec. F1.4) to EV 20 (1/2000, F 22)
- Film speed: ISO 25 / 15 to 3200 / 36
- Digital measuring and analog displaying exposure meter for continuous light measurements
- Light and object measurement
- Microprocessor controlled and monitored
- Digital LCD display in 1/3 steps
- Contrast display in 1/3 light values
- Measured value storage
- Display of all possible value pairs
- Overrange and underrange warning
- Automatic battery control
- Timer function as well as clock and alarm function
- Temperature display
- Light Meter Sekonic L-478DR-PX LiteMaster PRO
- for Phottix Strato II System Light Meter
- large LCD display (2.7 inch)
- with touch screen operation
- Radio remote shutter release: Radio remote shutter release System: Phottix Strato II
- Frequency: 2.4 GHz
- Sekonic Lumidisc
- suitable for Sekonic L-308 series light meters
- is used to measure the light falling on green screen walls, paintings or flat artworks
- Light meter
- compact and easy to operate
- large LCD display (2.7 inch)
- Touchscreen operation
- Radio remote trigger system: Elinchrom Skyport
- built-in 2.4 GHz radio module
- Shoe adapter
- suitable for light meter Gossen Digisix or Digiflash
- Light meter Sekonic L-478DR Litemaster Pro
- large LCD display (2.7 inch)
- with touchscreen operation
- Sekonic Sync Cord JL2B
- suitable for All Flash light meter
- 3-way - 5 meters long
- connects camera light meter and flash
- hardwired for reliability
- Light meter Sekonic L-478D Litemaster Pro
- large LCD display (2.7 inch)
- with touchscreen operation
- Colorimeter
- Spectral measurement of LED, HMI, fluorescent, daylight and flashlight in 1 nm steps in the range of 380 to 780 nm.
- extended color rendering indices
- extended color values
- large measuring range
- easy operation
- different display modes
- LB/CC filter
- Memory for up to 99 data sets
- C-800 software (download sekonic.com) allows settings in the device and saving of data
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
At the outside warehouse. Delivery time 4-6 working days after receipt of payment
The item is not in stock in our inhouse warehouse and will be ordered from the external warehouse/manufacturer or disributor after you have placed an order. The expected delivery time is 4-6 working days.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
This item is ordered exclusively for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Currently not available
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.
Delivery alarm
You would like to be informed as soon as the item is in stock?
Notification when the product is back in stock No reservation and no place on the waiting listYou want to reserve the product?
Order now, pay later (prepayment) Notification when the product is back in stock Product reservation and fixed place on the waiting list Cancellable at any time free of charge (until delivery)
The use of light meters in photography for optimally exposed photos
Exposure matched to the subject plays a fundamental role in photography. To achieve this, the light meter is of central importance, which is the subject of this article. In the course of this, you will also receive information about the use of the meter as well as the zone system of Ansel Adams.
What are light meters?
The light meter can be used to measure the brightness of the object to be photographed in order to make the appropriate settings for the aperture and exposure time on the camera. Almost all modern cameras have an integrated light meter that converts the measured values into an exposure value (automatic exposure) or allows manual settings. There is also the option of external metering. These handheld exposure meters are mostly used by professional photographers who work with artificial light (flash, continuous light) in the photo studio.
What are light meters used for?
Exposure meters can measure the amount of light falling on or reflected from a subject. Especially when the light intensity is not uniform within the photographed scene, setting the appropriate values using the light meter can make the difference between a properly exposed photo and a poor one. Cameras with built-in light meters use reflected light metering, where the reflected light from the camera is used to measure exposure. External exposure meters, on the other hand, measure the amount of light falling on a subject, for which the meter is placed near the subject. In contrast to reflection metering, the light is measured before it can be reflected by the subject. This incident light measurement also allows the light output of several flash heads used to be measured individually, which means that the various light sources can be controlled separately.
How to use a light meter?
When using the built-in reflected light metering, readings should be taken from different areas of the subject, for example dark shadow areas, bright light areas, and center zones. The meter can then automatically average the final exposure value and apply it to the camera's settings. For incident light metering, the external meter should be held in front of the camera. When doing this, make sure that the same light in the scene also falls on the exposure meter. After pressing the exposure meter button, the results can be read and the shutter and aperture of the camera can be adjusted accordingly
Zone system by Ansel Adams
The Zone System is a standardized way of working that guarantees correct exposure in any situation. The scale consists of eleven tonal values, the darkest value is pure black, the lightest value is pure white. Consequently, black is zone 0 and white is zone 10. The zones are defined by Roman numerals, with the middle tone value being in zone V (5) and having a reflectance of 18%. For digital photographers, zones 3 to 7 are particularly relevant, so that the darkest part of a subject is in zone 3 and the lightest part in zone 7. Consequently, everything below zone 3 is underexposed and everything above zone 7 is overexposed. For example, if the metering was based on a dark object in the background (Zone 3), photographers will need to underexpose by two stops from the average Zone 5 to reasonably expose the photo. Gray cards that are in the gray midtone (Zone V) serve as an additional tool for metering exposure.